DT-5000
and DT-5000X (for waste hauling trucks)
-
½” steel power mounts with Teflon sealed spherical bearings
-
Grade 8 bolts and nuts
-
Side arm wall tubing:
-
(3” x 2” x 3/16”) for the outer
-
(2½” x 1½” x 11 gauge) for the inner
-
Steel welded ends fitted for both the roll assembly and stabilizer bar
-
3½” galvanized steel tube roll assembly
-
1” steel stabilizer bar ahead of the roll assembly for increased tracking and stability
-
½” aluminum guiding system with a safety stop in the back/covered position
-
Lowering gantry is (3” x 3” x 3/16”) steel tubing for the lower
-
(2½” x 2½” x 3/16”) steel tubing for the upper
-
Lowering gantry has 24” of travel and an added safety feature in the front/uncovered position
-
Roll-of system has two gear driven flow dividers to insure a more consistent tracking of the arms
-
Roll cover is a Gorilla mesh with additional vinyl reinforcement
-
Cover system runs off the existing central hydraulics of the truck using a flow control valve
-
Three spool hand operated controls are mounted behind the cab on the drivers side
-
Built in check valve in the control valve body safely locks the system in both directions
-
Hydraulic cylinders:
-
(2” bore 24” stroke with a 1¼” chrome plated piston rod) for front to back arm movement and lowering of gantry
-
(2” bore 48” stroke with a 1½” chrome plated piston rod) for Power-Slide movement
-
Full 100% warranty on parts and labor for one year (excluding cover)
-
Complete installation included
Back to Waste Hauling Product Page
Home | About Us | Our Products | Special Designs | Price List | Contact Us
This site designed and maintained by WEBS BY DESIGN,LLC. 2002 © All copyrights reserved. For information or comments regarding this web site please email: webmaster