Specifications for Heavy Duty Dump Truck Covers

DT-1200 Series (8-12ft dump trucks)

3/8"” steel power mounts with Teflon sealed spherical bearings
Grade 8 bolts and nuts
Auto reset circuit breakers for both battery and switch wire circuits
Dash mounted toggle switch
Quick connect 4-pole switch connection and 2-pole battery connection
Remote power unit is mounted in our sealed Powerbox ™ and attached to the truck's chassis
Side arm wall tubing:

(2” x 1½” x 11 gauge)
Steel welded end caps and cylinder mounts
Hydraulic cylinders have a 1 3/4” bore 16” stroke with a 1¼” chrome plated piston rod
.25/3000 psi hydraulic hose with a #4 jic fitting
3½” galvanized steel tube roll assembly
18 oz. Armor Guard Cover (wear resistant and asphalt approved)
(UHMW) self-lubricating guides and wedges (high density polypropylene)
Complete installation included

DT-2000 Series (13-20ft dump trucks)

½” steel power mounts with Teflon sealed spherical bearings
Grade 8 bolts and nuts
Auto reset circuit breakers for both battery and switch wire circuits
Dash mounted toggle switch
Quick connect 4-pole switch connection and 2-pole battery connection
Remote power unit is mounted in our sealed Powerbox ™ and attached to the truck's chassis
Side arm wall tubing:

(2½” x 1½” x 11 gauge)
Steel welded end caps and cylinder mounts
Hydraulic cylinders have a 1 3/4” bore 16” stroke with a 1¼” chrome plated piston rod
.25/3000 psi hydraulic hose with a #4 jic fitting
3½” galvanized steel tube roll assembly
18 oz. Armor Guard Cover (wear resistant and asphalt approved)
(UHMW) self-lubricating guides and wedges (high density polypropylene)
Complete installation included

DT-3500S Series (18-26ft trailers) and DT-3500L Series (27-35 ft trailers)

½” steel power mounts with Teflon sealed spherical bearings
Grade 8 bolts and nuts
Auto reset circuit breakers for both battery and switch wire circuits
Dash mounted toggle switch
Quick connect 4-pole switch connection and 2-pole battery connection
Remote power unit is mounted in our sealed (Powerbox ™) and attached to the trucks trailer
Side arm wall tubing:

(3” x 2” x 3/16”) for the lower

(2½” x 1½” x 11 gauge) for the upper
Steel welded end caps and cylinder mounts
Hydraulic cylinders have a 2” bore 24” stroke with a 1¼” chrome plated piston rod
.25/3000 psi hydraulic hose with a #4jic fitting
3½” galvanized steel tube roll assembly
18 oz. Armor Guard Cover (wear resistant and asphalt approved)
(UHMW) self-lubricating guides and wedges (high density polypropylene)
Complete installation included

Back to Heavy Duty Dump Truck Product Page